Features of the 6 series air made-up fume hood:
A: The supply-air type exhaust hood forms a stable air curtain barrier at the front end of the workbench. The supply air volume is 50% of the exhaust air volume. Under normal operation, the indoor exhaust air volume is only 350m3/h - 400m3/h, achieving energy savings while meeting the leakage rate standards.
B: The advanced airflow layout and deflection design ensure that the average exhaust air velocity is 0.3m/s under supply air conditions, and the leakage rate is within 0.01ppm.
C: The window is made of 5mm tempered glass, which does not splatter in case of breakage, protecting personal safety.
D: The top lamp cover has an explosion load-off function.
E: The collection hood is equipped with a condensate water collection device, directly introducing the cold condensed solution in the pipeline into the wastewater.
F: The window with a fall-prevention mechanical double-locking mechanism can prevent falls of ≤ 80mm distance when one or both transmission devices break.
G: The toothed synchronous belt drive design makes the window easy to push and pull, with low noise, and the steel wire rope is wrapped by the synchronous belt, effectively preventing corrosion.
H: The narrow frame design maximizes the internal usage space of the cabinet.
1: The modular inner lining design allows for selection of materials such as ABS, ceramic, and PP based on experimental requirements, suitable for different experimental environments.
J: Equipped with water, electricity, and gas modules to flexibly meet usage needs.
K: The product can be optionally equipped with a pipeline fire safety detection system and concentration detection and processing system.
L: The lower cabinet has a negative pressure exhaust function, allowing for the storage of some common reagents to prevent gas volatilization and odor generation.
M: The lower cabinet can be optionally equipped with a lockable fire safety storage cabinet to store a small amount of flammable, combustible, or corrosive drugs and reagents.